Daily Archive: July 5, 2010

Jul 05

Configures the ISDN PRI interface for Call Selection

The default behaviour of the ISDN  interface to start from bottom of the channel list for incoming calls. To set the default behaviour for outgoing calls following command should be used which starts using channels from the top.

  isdn bchan-number-order {ascending |descending}

 

Example:

 

Router(config-if)# isdn bchan-number-order descending   Ref: http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/cisco_ios_isdn_voice_configuration_guide/isdn10.html

 

Related Posts

Jul 05

How to busy out the B-channel on an ISDN PRI in IOS gateways – Cisco Support Community

Use 'sh isdn status' command to know which serial interface is being used by PRI and then use 'isdn service b_channel 2 state 2' to set a channel state.

How to busy out the B-channel on an ISDN PRI in IOS gateways – Cisco Support Community

Related Posts